Sand dredging pumps components material according to the customer’ different demand to choose to produce sand pump. As following materials:
First, cast iron material
1.Sand dredging pumps gray cast iron is the most commonly used in cast iron. The national standard code is HT. This material generally uses on sand pump body, impeller, pump cover, suspension and so on.
2.Ductile iron, which has better comprehensive performance in cast iron. The national standard code is QT. Ductile iron mechanical properties close to the steel. While its casting performance and processing performance is better than steel. For these reasons we usually regard ductile iron as cast steel’s alternative.There are also corrosion-resistant cast iron – high silicon cast iron, wear-resistant cast iron – white cast iron, and high toughness cast iron – malleable cast iron. Because they are hard to process, few products use it.
sand dredging pumps cast iron material
Second, cast steel material
As the strength of cast steel is high, usually when the pressure> 1.6Mpa, the pumping pump pressure parts more use of cast steel.
Third, stainless steel material
The most used stainless steel is the austenitic stainless steel. Such as 0Cr18Ni9, 1Cr18Ni9Ti, 0Cr18Ni12Mo2Ti and so on. In addition to hydrochloric acid, dilute sulfuric acid and other small number of media, the austenitic stainless steel is an excellent corrosion-resistant materials. It is the most commonly used corrosion-resistant materials for chemical pump. In addition, high alloy stainless steel (20 alloy) and double stainless steel are also the ideal corrosion-resistant materials.
Fourth, alloy material
The most representative alloy steel is Cr26, high strength sand pump material usually uses it.
sand dredging pumps alloy material
Fifth, non-metallic materials
Pumping sand pump sealing usually mainly uses non-metallic materials. Such as PTFE, fluorine rubber and so on. Among them, PTFE is suitable for almost all chemical media in 250 ℃. Because it has excellent corrosion resistance and high temperature performance. It is suitable for almost all chemical media in 250 ℃. The disadvantages are high hardness and difficult assembly.
